1: take care not to open the wiper, because if there is no water on the front glass, wiper wear will increase, affecting its level.
2: when the rain is, if the windscreen is too dirty, use a wiper motor spray it spray water glass water, to increase his degree of lubrication, and keep alive the good Wiper Blade surface sophistication.
3: remember to always check the water level in the Water Kettle, missing time.
That's all, if there was a scrape dirty or blurred when using, you need to replace the wiper blades, if still fuzzy after replacing wiper blades. Then check the elasticity of the wiper arm is normal, if the elastic reducing the need to replace the wiper arm off.
- Car Wiper Blade
- The Proper Use Of Wiper Blade
- Degradation Causes
- Replacement Cycle
- Wiper Blade
- Wiper Wiper Blade Is Made Of What Materials?
- Wiper Sheet
- New Develop Wiper Blade Make in China Meto
- METO WIPER BLADE December Automechanika Shangha...
- METO Factory Chinese Spring Festival Holiday Fr...
- METO Wiper Blade 2018 Exhibition Show Plan
- TIAF Supported By Automechaniak Russia Kazanska...
- NO.123 CANTON FAIR METO WIPER BLADE Booth Number
- Installation Method Of Wiper
- METO Wiper Blade Factory Top Important Customer...
- Finish Spanish Customer Wiper Blade Order In Time